氧化物陶瓷阻氚涂层的研究进展

利用阻氚涂层(TPB)降低结构材料中的氚损失,是聚变堆发展中的热点研究之一。陶瓷具有低氚渗透性、耐腐蚀性、高硬度和高热稳定性等特性,是目前聚变堆阻氚涂层首选材料。相对于硅化物、钛基等非氧化物陶瓷材料,氧化物陶瓷涂层具有熔点高、化学性质稳定、耐腐蚀性和阻氚渗透因子(PRF)高等优势,因此针对氧化物陶瓷阻氚涂层的研究较多。主要综述了单一氧化物陶瓷、复合氧化物陶瓷阻氚涂层近年来的研究现状与发展,如Y2O3、Er2O3、Al2O3等及其复合氧化物陶瓷材料,其中,因Al2O3及其复合物涂层具有优异的阻氚性能,得到了广泛的关注和研究。重点阐述了制备工艺、基体效应和辐照等影响氧化物陶瓷涂层阻氚性能的因素及氚在材料中的渗透机制,并分析了当前阻氚涂层在材料制备以及模拟服役环境等方面存在的不足与今后的研究重点,指出了未来可能的氧化物陶瓷阻氚涂层,以期为阻氚涂层的研究与后续实验提供一定的方向。     

含复合(Ti,Mo)C析出相的马氏体钢的氢捕获与解吸附

采用热脱氢分析装置 (TDS) 研究了含复合 (Ti,Mo)C析出相的马氏体钢的氢的捕获与解吸附行为。结果表明,36-60 nm的未溶球形(Ti,Mo)复合析出相在室温电化学充氢过程中不能捕获氢,而回火析出的1-5 nm的复合 (Ti,Mo)C析出相是有效的氢陷阱,尽管其氢陷阱激活能相对较低,为16.4-22.1 kJ/mol,与晶界、位错处的氢陷阱激活能相近,同时远低于纯的共格TiC析出相的氢陷阱激活能,但在大气中放置时,被回火析出的1-5 nm的复合 (Ti,Mo)C析出相捕获的氢无法解吸。     

FCC-to-HCP Phase Transformation in CoCrNix Medium-Entropy Alloys

A hybrid first-principles/Monte Carlo simulation is combined with experiments to study the structure and elastic properties of CoCrNi_x (x = 1-0.5) alloys. The experimental X-ray diffraction patterns show that the structures have changed from the single-phase face-centered cubic (FCC) structure at x = 1-0.8 to the coexistence of FCC and the hexagonal close-packed structures at x = 0.7-0.5, which is further confirmed by calculations on mixing energies. The elastic moduli by calculation are basically in agreement with experiments. Room-temperature tension shows that the six alloys have a certain plasticity, the strength and plasticity of the alloys have a linear decrease with the decrease in Ni contents, and the plasticity of the alloys drops from 84 to 23%. Furthermore, first-principles density function theory calculations were employed to reveal the electronic and magnetic structures of alloys. The electron density of states for all alloys is asymmetrical, which illustrates that the alloys are ferromagnetism. It is found that Cr atoms can suppress the ferromagnetism of alloys, since Cr atoms have both positive and negative magnetic moments in all alloys.     

Effect of Ni-coated MoS2 on microstructure and tribological properties of (Cu−10Sn)-based composites

The (Cu−10Sn)−Ni−MoS₂ composites, prepared by powder metallurgy, were studied for the effects of Ni-coated MoS₂ on the microstructure, mechanical properties and lubricating properties. The mechanism of effects of Ni and MoS₂ on the properties of composites was analyzed through a comparative experiment by adding Ni and MoS₂ separately. The results show that the nickel wrapping around the MoS₂ particles decreases the reaction rate of MoS₂ with the copper matrix, and greatly improves the bonding of the matrix. The composites with 12 wt.% Ni-coated MoS₂ (C12) show the optimum performance including the mechanical properties and tribological behaviors. Under oil lubrication conditions, the friction coefficient is 0.0075 with a pressure of 8 MPa and a linear velocity of 0.25 m/s. The average dry friction coefficient, sliding against 40Cr steel disc, is measured to be 0.1769 when the linear velocity and pressure are 0.25 m/s and 4 MPa, respectively.     

Nanoparticle evolution in flame spray pyrolysis—Process design via experimental and computational analysis

In flame spray pyrolysis (FSP), the evolution of metal oxide nanoparticles relies on quite a number of droplet (liquid) and vapor phase related physical mechanism as for instance precursor evaporation, oxidation, nucleation via gas-to-particle conversion mechanism, and subsequent particle (solid) growth mechanisms based on coagulation, sintering/coalescence, and agglomeration. The liquid precursor and dispersion oxygen feed rates are relevant control parameters of the FSP process for tailoring the nanoparticle size (diameter) and structure as well as the atomizer nozzle configuration. Sophisticated nonintrusive, laser-based in situ and ex situ diagnostics with multiscale spatial resolution (micrometer to meter range) are applied for analyzing droplet formation and size, gas velocity, temperature, species concentration, as well as primary and agglomerate diameters along the flow direction. Computational fluid dynamics (CFD) are coupled with population balance modeling (PBM) to elucidate the nanoparticle dynamics within the reactive spray. It is found that the CFD-PBM approach allows estimations of primary and agglomerate nanoparticle diameters within 80 and 75% accuracy compared to experimental data, suggesting that the methods presented could pave the way for designing next-generations of flame reactors.     

Integrated process design,scheduling, and model predictive control of batch processes with closed-loop implementation

Simultaneous evaluation of multiple time scale decisions has been regarded as a promising avenue to increase the process efficiency and profitability through leveraging their synergistic interactions. Feasibility of such an integral approach is essential to establish a guarantee for operability of the derived decisions. In this study, we present a modeling methodology to integrate process design, scheduling, and advanced control decisions with a single mixed-integer dynamic optimization (MIDO) formulation while providing certificates of operability for the closed-loop implementation. We use multi-parametric programming to derive explicit expressions for the model predictive control strategy, which is embedded into the MIDO using the base-2 numeral system that enhances the computational tractability of the integrated problem by exponentially reducing the required number of binary variables. Moreover, we apply the State Equipment Network representation within the MIDO to systematically evaluate the scheduling decisions. The proposed framework is illustrated with two batch processes with different complexities.     

Effect of B2O3 addition on structure and properties of Yb3+/Al3+/B3+-co-doped silica glasses

The homogeneous Yb³⁺/Al³⁺/B³⁺-co-doped silica glasses were prepared via a sol-gel method. The impact of B₂O₃ addition on the physical and optical properties and network structure was systematically studied. The network structure was investigated by the Fourier Transform Infrared (FT-IR), Raman spectra, and Solid State Nuclear Magnetic Resonance (SSNMR). Herein, B₂O₃ addition can continuously decrease the refractive index and density. When B₂O₃ is lower than 2 mol%, B₂O₃ addition can obviously decrease the scalar crystal field parameters, Yb³⁺ asymmetry degree, Yb³⁺ cross-sections, due to the generation of Yb–O–B bonds at the cost of partial Yb–O–Al/Si ones. When B₂O₃ is more than 2 mol%, FT-IR, Raman spectra, and SSNMR results indicate that further increased B atoms prefer to connect with Si and Al rather than Yb. Consequently, the above parameters are basically unchanged. Based on the results, an intuitive model of structure and properties evolution during the substitution of SiO₂ by B₂O₃ has been established.     

In situ reaction and solid solution induced hardening in (Ti,Zr)B2-(Zr,Ti)C composites

(Ti,Zr)B₂ - (Zr,Ti)C ceramics were synthesized by reactive hot-pressing and solid solution coupling effect using ZrB₂ and TiC powders as starting materials. Effects of sintering temperature on phase relations, microstructure and mechanical properties were reported. The equimolar ZrB₂ and TiC reactants ensured a complete in situ reaction to form (Ti,Zr)B₂ and (Zr,Ti)C solid solutions. The (Ti,Zr)B₂ - (Zr,Ti)C composite sintered at 1750°C was fully densified, and exhibited a high hardness of 29.1 GPa due to fine-grain hardening and solid solution hardening. The optimized comprehensive mechanical properties such as a hardness of 27.9 GPa, a strength of 705 MPa and an indentation fracture toughness of 5.3 MPa m^1/2 were achieved in (Ti,Zr)B₂ - (Zr,Ti)C composites sintered at 1800°C for 1 hour.     

A hybrid system of hydrogel/frog egg-like microspheres accelerates wound healing via sustained delivery of RCSPs

In this article, a hybrid system of hydrogel/frog egg-like microspheres (H-FMS) formed by the combination of coaxial electrostatic spraying and freeze-drying was introduced for enhancing wound healing efficiency through the sustained release of Rana chensinensis skin peptides (RCSPs). The porous PVA/gelatin hydrogel were obtained and frog egg-like microspheres (FMS) of sodium alginate (SA), shaping uniform and smooth, were embedded into hydrogel. Based on PVA/gelatin hydrogel, the FMS addition increased the water absorption of hydrogel to 1,105%. RCSPs were more effectively encapsulated into FMS than solid microspheres (MS). Not only does the H-FMS act as good “depots” for sustained release of RCSPs over 9 days, without exhibiting obvious burst release, but also show good biocompatibility in vitro. In vivo studies on wound healing as well as the histology of fibroblasts, re-epithelialization, inflammation, and hair follicles indicated that the structure of H-FMS released RCSPs continuously and promoted wound healing in rats significantly.     

异烟肼衍生物对聚L-乳酸性能的影响

以异烟肼和均苯三酸为原料合成了新型均苯三酸三异烟肼,考察了其对聚L-乳酸(PLLA)结晶性能和热稳定性的影响。结果表明:均苯三酸三异烟肼起到了异相成核的作用,能有效提升PLLA的结晶速率,其中添加质量分数2.0%的均苯三酸三异烟肼可使PLLA有最大非等温结晶焓,但过量的均苯三酸三异烟肼却不利于PLLA的结晶。均苯三酸三异烟肼的加入不会改变PLLA的热分解行为,但随着均苯三酸三异烟肼含量的增加,其起始分解温度下降。